Unfortunately, this Zenith watch has already been sold.

Zenith Rare Vintage S.58 / First Series / Cal.120 / 1960 / Serviced


Sell your watch quickly and easily on Chrono24

Sell Zenith?


Basic Info

Ref. No. S.58
Movement Manual winding
Case material Steel
Bracelet material Leather
Year 1960
Condition 1 (mint)
Gender Men's watch/Unisex
Location Germany, München
Price 5,000 € (= [SOLD])
Availability Available now


Movement Manual winding
Movement/Caliber Cal.120
Power reserve 48 h
Number of jewels 18
Frequency 18000 A/h


Case material Steel
Case diameter 37 x 46 mm
Waterproof Not Waterproof
Material bezel Steel
Glass Plexiglass
Dial Silver
Dial numerals Arabic numerals


Bracelet material Leather
Bracelet color Brown
Lug width 20 mm Size guide
Clasp Buckle
Clasp material Steel


Center Seconds, Luminescent Hands, Limited Edition, Only Original Parts, Luminous indexes


A rare bird - diver's watch introduced by Zenith in 1958 (probably to commemorate geophysics year). The model index is S.58 where S stands for "Super" talking about waterproof capabilities and 58 stands for the year. There is an opinion that the complete first batch of 1200 pieces were entirely purchase by Cairelli for Italian navy.

This particular first series piece was among the last produced before Zenith switched to the next generation in 1960. It features manual-winding Cal.120 with hacking feature, durable 37 mm steel case without rotating bezel and with screw-down caseback.

The watch went through complete service in October 2016.

Manufacturer: Zenith, Switzerland
Model: S.58
Reference: n/a
Type: Manual-winding diver's watch
Year of production: ca.1960 (ca. according to movement serial number)
Case type: 2-body, with screw-down caseback, high-polished finishing and flat bezel.
Case material: Stainless steel
Case measurement: 37 mm (without crown) / 46 mm (lug-to-lug) / 20 mm (between lugs)
Case serial number: 946172
Case back: Screw-down, signed "S.58" on the outter part of the caseback. Unsigned on the inner part.
Crown/pushers: Steel fluted crown.
Crystal: Acrylic
Movement type: Manual-winding movement with hacking feature
Movement model: Zenith Cal.120, signed "Zenith Swiss Made". 18 jewels, 18000 A/h, 48 hours of power reserve, incabloc shock-protection.
Movement serial number: 4916651
Dial: Silver-white dial decorated with black printed minutes track on the outer perimeter, raised luminous golden hour markers. Reflective golden printed Arabic numerals at quarters. Signed "Zenith" at 12 o'clock and bears golden raised star logo. Signed "S.58" and "Swiss" at 6 o'clock.
Hands: Golden luminous hour and minute hands, golden sweep seconds hand with luminous pointer.
Case condition: 2 (fine). Most likely unpolished. Very strong and sharp edges and geometry.
Movement condition: 1 (mint) professionally serviced in October 2016. Adjusted and keeps good time. All functions work properly.
Dial/hands condition: Near-mint original untouched dial. Shows light aging on the edge near 9 and 3 o'clock. Original untouched hands showing certain oxidation.
Overall condition: 1 (mint) - 2 (fine)
Delivery set: The watch comes with brand-new genuine leather strap or neylon NATO strap and generic steel buckle. Along with our company’s warranty certificate, general terms and conditions of sale, our company’s box.
Warranty: 1-year technical warranty

Size guide for wristbands

1 | Lug width

The lug width is the width of the strap at the end that is attached to the watch. This is the interior distance between the two lugs (horn-like protrusions) on the watch casing. The strap will fit your watch only if the lug width of the watch is the same width as the strap.

2 | Buckle width

The buckle width is the width of the strap at the buckle end. If you want to keep your watch’s original buckle and replace only the strap, the width of the original buckle must be identical to the strap width. For watches with folding clasps, please choose a strap specially made for your particular clasp.

3 | Strap length

The strap length is the combined length of the short strap side 3A (without buckle) and the long strap side 3B. For metal straps, the length of the strap including the clasp is measured in the closed position.

4 | Strap thickness

Strap thickness is the height of the strap. Many leather straps thin out towards the buckle end, or “taper”. If you want to keep your watch’s original buckle and replace only the strap, the strap thickness must match the height of the original buckle. For watches with folding clasps, please choose a strap specially made for your particular clasp.