Sinn U1 Camouflage

$2,140

Ready to ship in 3-5 days

Seller
Contact seller

Details

Basic Info

Movement Automatic
Case material Steel
Condition 0 (unworn)
  New
  With box
  With papers
Location Australia, Brisbane
Price AU$ 2,865 (= $2,140)
Availability Ready to ship in 3-5 days

Caliber

Movement Automatic
Movement/Caliber SW 200-1
Base Caliber SW 200-1
Number of jewels 26

Case

Case material Steel
Case diameter 44 mm
Thickness 22 mm
Waterproof 100 ATM
Glass Sapphire Glass

Bracelet/strap

Lug width 22 mm Size guide

Description

U1 Camouflage – The diving watch made of German Submarine Steel.

Limited edition to 500 units
Completely made of high-strength seawater-resistant German Submarine Steel
Bezel with TEGIMENT Technology and therefore especially scratch-resistant
Tested based on European diving equipment standards and certified by DNV GL
Captive diver's bezel with minute ratcheting
Crown at 4 o'clock to prevent pressure on the back of the hand
Sapphire crystal glass
Pressure-resistant to 1,000 m diving depth (100 bar), certified by DNV GL
Low pressure resistant
The U1 Camouflage is an extraordinarily eye-catching diver’s watch. Made from high-strength, seawater-resistant German Submarine Steel, it features a dial that incorporates a camouflage colour design. The U1 Camouflage comes with a matching green silicone strap and an olive drab textile strap as standard. This allows you to swap and change the strap to suit the occasion or purpose.

The surface of the captive rotating bezel has also been hardened using TEGIMENT Technology, making it especially scratchresistant. The classification company DNV GL has tested the reliability and suitability of the watch for professional diving. DNV GL verifies and certifies pressure resistance to a diving depth of 1,000 metres (= 100 bar) and temperature resistance and functionality in accordance with the European diving device standards.

Limited to just 500 pieces, the U1 Camouflage is an exceptional timepiece in the U1 series.

Australian GST applies to sales within Australia.

Technical details

Mechanical Movement

SW 200-1
Self-winding mechanism
26 bearing jewels
28,800 semi-oscillations per hour
Seconds stop function
Shock resistant as per DIN 8308
Anti-magnetic as per DIN 8309
Case

Case made of German Submarine Steel, bead-blasted
Sapphire crystal glass in front, anti-reflective on both sides
Case back screw-fastened
Crown screwable
Meet the technical requirements for waterproofness, as set out in standard DIN 8310
Pressure-resistant up to 1,000 m diving depth (= 100 bar), certified by
DNV GL
According to the technical demands for the diving norm DIN 8306
Tested based on European diving equipment standards EN 250 / EN14143 and certified by DNV GL
Low pressure resistant
Functions

Hours, minutes, seconds
Date display
Diver’s bezel with minute ratcheting and luminous key mark
SINN Technologies

Bezel with TEGIMENT Technology, therefore especially scratch-resistant
Captive bezel
Dimensions and Weight

Case diameter: 44 mm
Band lug width: 22 mm
Case thickness: 14.3 mm
Weight without strap: 113 gramme
Dial and Hands

Camouflage dial
Indices coated with luminescent colour
Hour, minute and second hand coated with luminescent colour
Warranty

2 years

Seller

Information

Tel.: [+61] (0)7 3395 7728
Mobile: [+61] (0)7 3395 7728

Sell your watch quickly and easily on Chrono24

Sell Sinn?

Size guide for wristbands

1 | Lug width

The lug width is the width of the strap at the end that is attached to the watch. This is the interior distance between the two lugs (horn-like protrusions) on the watch casing. The strap will fit your watch only if the lug width of the watch is the same width as the strap.

2 | Buckle width

The buckle width is the width of the strap at the buckle end. If you want to keep your watch’s original buckle and replace only the strap, the width of the original buckle must be identical to the strap width. For watches with folding clasps, please choose a strap specially made for your particular clasp.

3 | Strap length

The strap length is the combined length of the short strap side 3A (without buckle) and the long strap side 3B. For metal straps, the length of the strap including the clasp is measured in the closed position.

4 | Strap thickness

Strap thickness is the height of the strap. Many leather straps thin out towards the buckle end, or “taper”. If you want to keep your watch’s original buckle and replace only the strap, the strap thickness must match the height of the original buckle. For watches with folding clasps, please choose a strap specially made for your particular clasp.